Industries - Ewart Agri Services Ltd, UK | Worldwide Manufacturer of Industrial Chains

Industries / Sugar Mills Refineries / Feed And Wash Table Chains

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	ROLLER DIA.	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	STYLE	DESIGN	BUSH DIA. B	C	F	X	W	BOLT DIA.	Y	H
SC132	6.000	10000	100000	1.00	49mm	2.00	0.50	3.37	S	S.R	1.34	3.78	4.41	1.58	6.51	0.50	1.42	1.30
B5333	6.050	10000	160000	1.00		2.75	0.50	2.00			1.75	5.48	4.03	10.00				1.06

Bar Link Chains

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR THICKNESS T	MAX. GEARING G	INNER SIDE DEPTH A	OUTER SIDE DEPTH A1
S3699	6.031	6000	130000	1.12	0.50	1.56	2.50	2.88
B5283	6.031	6400	136000	1.12	0.50	1.63	2.50	2.69

Block Link Chains

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	E	F	X	W	BOLT DIA.
E30200	200.000	2850	90000	0.75	1.75	0.31	1.00	1.12	15MM	100MM	65MM	2.88	2.00	20MM

Block Link Chains 2

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	F
BL09060	6.000	4400	60000	0.75	2.00	0.38	40MM	1.12	28mm	75mm
BL09063	6.000	7200	140000	0.94	2.38	0.41	55mm	1.25	29mm	73.5mm

Combination chains

Attachment Data
S1 attachments are one piece sides flame cut to close limits to ensure maximum strength and accuracy. Standard practice is to supply these in pairs but single S1’s can be supplied.

K2 attachments maybe used in this application and are available on request.

A comprehensive range of other attachments are available for these chains which are supplied mainly to elevator applications.

Eccentric Barrels
The Ewart Combination Chains below have eccentric barrels. The extra thickness occurs on the pitch line at the outer ends of the centre link. This ensures the leading barrel is clear of the sprocket tooth face. The elimination of severe sliding contact under heavy pressure reduces the extent of the wear, to which, block links of symmetrical barrel design are prone.

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	C	BAR DIA.	K
C131	3.070	3220	27500	0.62	1.50	0.38	1.13	3.25	1.25	4.00
C102B	4.000	4200	27500	0.62	1.50	0.38	1.75	3.75	1.00	4.50
C111	4.760	6000	36000	0.75	1.75	0.38	2.25	4.38	1.44	5.25
C110	6.000	4200	27500	0.62	1.50	0.38	1.75	4.25	1.25	5.00
C132	6.050	10000	60000	1.00	2.00	0.50	2.88	10.00	1.72	11.00
C132	6.050	10000	60000	1.00	2.00	0.50	2.88	10.00	1.72	11.00
C132	6.050	10000	60000	1.00	2.00	0.50	2.88	10.00	1.72	11.00

Forged Rivetless

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	MAX. GEARING G
348	3.031	2400	24000	0.50	1.13	0.74
458	4.031	3000	48000	0.62	1.38	1.06
468	4.031	7000	68000	0.75	1.88	1.81
678	6.031	8500	85000	0.87	2.00	1.25
698	6.031	13000	136000	1.10	2.53	1.53
698HD	6.031	13000	136000	1.10	2.69	1.53
998	9.031	13000	136000	1.10	2.66	1.53

H Class Pintle Chains

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	MAX. GEARING G	BUSH DIA. B	C	F	X
H78	2.609	2380	16000	0.50	1.13	1.13	0.88	3.50	2.42	1.13
H82	3.075	3080	20000	0.56	1.25	1.25	1.22	3.37	2.62	1.56

H1 attachments

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	MAX. GEARING G	BUSH DIA. B	C	F	X
H78	2.609	2380	16000	0.50	1.13	1.13	0.88	3.50	2.42	1.13
H82	3.075	3080	20000	0.56	1.25	1.25	1.22	3.37	2.62	1.56

H1 attachments 2

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	MAX. GEARING G	BUSH DIA. B	C	X
W124	4.000	6200	47000	0.75	1.50	1.50	1.25	3.25	4.00
W132	6.050	13000	78000	1.00	2.00	2.88	1.75	5.00	6.00

H2 Attachment

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	MAX. GEARING G	BUSH DIA. B	C	F	X
H78	2.609	2380	16000	0.50	1.13	1.13	0.88	3.50	2.42	1.13
H82	3.075	3080	20000	0.56	1.25	1.25	1.22	3.37	2.62	1.56

Steel Chains - A2 Type

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	ROLLER DIA.	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	E	F	X	W	BOLT DIA.
6022	6.000	3875	22000	0.56	65MM	1.50	0.25	1.31	0.92	2.44	2.00	80MM	80MM	52MM	0.38

Steel Chains - AS2 Type

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	E	F	X	W	BOLT DIA.
B5111	4.760	8860	75000	0.75	2.00	0.38	2.62	1.44	4.76	3.50	5.00	2	4.00	0.50

Steel Chains - AS2 Type 2

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	ROLLER DIA.	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	E	F	X	W	BOLT DIA.
B5276	6.050	5900	60000	0.75	2.63	2.00	0.38	1.38	1.00	4.40	3.25	4.50	2.00	3.38	0.50

Steel Chains - K2 Slat Type Feed Tables

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	ROLLER DIA.	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	E	F	X	W	BOLT DIA.
0904	4.000	4850	40000	0.69	2.00	1.75	0.31	1.22	1.00	1.25	1.44	2.63	4.13	3.50	0.38
09060	6.000	6350	60000	0.75	2.75	2.00	0.38	1.50	1.13	1.63	3.00	4.50	6.75	4.38	0.50
09061	6.000	6350	85000	0.75	2.75	2.25	0.38	1.50	1.13	1.63	3.00	4.50	6.50	4.38	0.50
1796	6.000	7500	100000	0.87	2.75	2.25	0.38	1.50	1.25	1.63	3.00	4.50	6.50	4.38	0.50
SS2198	6.000	7650	100000	0.87	2.75	2.25	0.50	1.50	1.25	1.63	3.00	4.50	5.94	4.38	0.50
09063	6.000	8300	140000	0.94	3.00	2.38	0.41	1.50	1.25	1.75	3.00	4.50	6.50	4.38	0.50

Steel Chains Pusher Type

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	X
S82	3.075	4300	35000	0.62	1.50	0.25	1.37	1.19	5.19	5.94
SS102B	4.000	6300	40000	0.62	1.50	0.38	2.13	1.00	3.75	4.50
SS110	6.000	6300	40000	0.62	1.50	0.38	2.13	1.25	4.25	5.50
B5298	6.000	6550	90000	0.75	2.38	0.38	1.55	1.38	5.00	6.19
B5143	135.000	5575	55000	0.75	2.00	0.31	1.50	1.10	4.88	5.88

Steel Chains Pusher Type 2

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	ROLLER DIA.	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	F	X
SS39	3.075	4650	48000	0.62	1.25	1.50	0.31	1.50	0.88	1.75	0.66	2.50

Steel Chains Pusher Type 3

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	ROLLER DIA.	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	F	X
B5296	6.000	7400	90000	0.88	2.75	2.00	0.38	1.50	1.25	5.00	1.75	6.00

Steel Chains Pusher Type 4

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	ROLLER DIA.	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	F	X
B5070	4.000	6300	40000	0.69	2.75	2.00	0.25	2.00	1.00	3.88	2.23	4.88

Steel Chains Pusher Type 5

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	E	F	X	BOLT DIA.
B5099	4.000	9500	75000	0.75	2.00	0.38	2.62	1.44	3.25	2.25	4.16	5.50	0.50

Steel Chains Pusher Type 6

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	ROLLER DIA.	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	F	X
B5047	3.075	5100	70500	0.65	1.25	1.56	0.38	1.50	0.91	4.75	2.56	5.53

Steel Chains Pusher Type 7

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	ROLLER DIA.	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B	C	X
B5191	150.000	6200	82500	0.88	66MM	2.19	0.31	1.25	1.25	3.5	4.59

Welded Steel Chains

CHAIN NO.	PITCH P	ALLOW. LOAD	U.T.S.	PIN DIA. D	SIDEBAR DEPTH A	SIDEBAR THICKNESS T	MAX. GEARING G	BUSH DIA. B
WH78	2.609	3500	30000	0.50	1.13	0.25	1.13	0.88
WH82	3.075	4400	36000	0.56	1.25	0.25	1.25	1.06
WH124	4.000	7200	69000	0.75	1.50	0.38	1.50	1.25
WH111	4.760	8850	91000	0.75	1.75	0.38	2.00	1.25
WH132	6.050	15300	115000	1.00	2.00	0.50	2.88	1.75

* The tabular dimensions and weights are approximate and are not binding. Design improvements may result in variation from the published figures and verification is recommended.