Industries / Dairy Chains
Malleable CC600 D chain
Drawing 229
| CHAIN NO. |
PITCH P |
ALLOW. LOAD |
U.T.S. |
PIN DIA. D |
SIDEBAR DEPTH A |
X |
B |
Z |
MIN TURN RAD |
T1 |
|---|---|---|---|---|---|---|---|---|---|---|
| CC600D | 2.500 | 1500 | 12500 | 0.44 | 1.13 | 1.69 | 1.13 | 2.13 | 21 | 0.56 |
Malleable CC600/CC625 chain
Drawing 228
| CHAIN NO. |
PITCH P |
ALLOW. LOAD |
U.T.S. |
PIN DIA. D |
SIDEBAR DEPTH A |
X |
B |
MIN TURN RAD |
|---|---|---|---|---|---|---|---|---|
| CC600 | 2.500 | 1500 | 12500 | 0.44 | 1.13 | 1.69 | 1.13 | 21 |
| CC625 | 2.520 | 1500 | 12500 | 0.44 | 1.13 | 1.69 | 1.13 | 21 |
Plastic CC600 D chain
Drawing 245
| CHAIN NO. |
PITCH P |
ALLOW. LOAD |
U.T.S. |
PIN DIA. D |
SIDEBAR DEPTH A |
SIDEBAR THICKNESS T |
X |
B |
Z |
MIN TURN RAD |
|---|---|---|---|---|---|---|---|---|---|---|
| CC600D | 2.500 | 1500 | 12500 | 0.44 | 1.13 | 0.56 | 1.69 | 1.13 | 2.13 | 21 |
Plastic CC600 DB chain
Drawing 247. Note: This chain is supplied with knurled pins only.
| CHAIN NO. |
PITCH P |
ALLOW. LOAD |
U.T.S. |
PIN DIA. D |
SIDEBAR DEPTH A |
SIDEBAR THICKNESS T |
X |
B |
Z |
MIN TURN RAD |
|---|---|---|---|---|---|---|---|---|---|---|
| CC600DB | 2.500 | 1850 | 2900 | 0.44 | 1.14 | 0.58 | 1.69 | 1.14 | 2.05 | 30 |
Plastic CC600 F chain
Drawing 246
| CHAIN NO. |
PITCH P |
ALLOW. LOAD |
U.T.S. |
PIN DIA. D |
SIDEBAR DEPTH A |
X |
B |
Z |
MIN TURN RAD |
|---|---|---|---|---|---|---|---|---|---|
| CC600F | 2.500 | 1850 | 3400 | 0.44 | 1.13 | 1.62 | 1.13 | 0.22 | 30 |
Plastic CC600 Plain chain
Drawing 243. Note: Both snap fit and circlip pin styles are available.
| CHAIN NO. |
PITCH P |
ALLOW. LOAD |
U.T.S. |
PIN DIA. D |
SIDEBAR DEPTH A |
X |
B |
MIN TURN RAD |
|---|---|---|---|---|---|---|---|---|
| CC600 | 2.500 | 1500 | 12500 | 0.44 | 1.13 | 1.69 | 1.13 | 21 |
* The tabular dimensions and weights are approximate and are not binding. Design improvements may result in variation from the published figures and verification is recommended.
